The USB- C VGA Multiport Adapter connects a Mac with a Thunderbolt 3 port (in USB-C or USB-C mode) or a USB-C port to a display with VGA port. It also includes a USB-C port that allows you to charge your MacBook Pro and a USB-A port that connects your Mac to USB-A devices. It is possible to use all three ports at once. You can daisy chain up to eight monitors by connecting a series of display devices using a wired connection from monitor to monitor in a series, rather than connecting each monitor directly to Surface Thunderbolt 4 Dock. To daisy chain monitors, you need two or more monitors that support at least DisplayPort 1.2 and Multi-Stream Transport (MST). The HDMI and DVI adapters the other respondents have mentioned are actually USB-C to HDMI (or DVI or Docking station). So although USB-C and ThunderBolt 3 use the same connector, they don't use the same signalling protocol. Thunderbolt 3 adapters WON'T work in USB-C ports unless those ports are also marked as ThunderBolt 3. Nazim. 11 1. Just FYI: My current setup with Macbook Air M1 is external (non-apple) dongle with multiple ports (HDMI, USB, USB-C, memory cards) and I'm connecting monitor via HDMI in this dongle. If a lid is closed, laptop needs to be connected to the charger (via USB-C port in this dongle). It's a pity that this setup cannot be achieved Output 2: HDMI 1 or DisplayPort 1. Output 3: HDMI 2 or DisplayPort 2. Output 2 and Output 3 are likely using DP++, which means they can be set to output either an HDMI or DisplayPort signal, but not both at the same time. It seems that Output 2 is physically connected from the GPU to both the charging USB-C port (#1) and the HDMI port (#5). The ZettaGuard dock you found is just like the universal docks available from a variety of other vendors, including Dell, which sells a similar docking station called the D6000. As you suspect, when you connect it via USB-A "regular USB" rather than USB-C, then the dock can't power the system. It’s good that you can switch to a hotspot and USB. Supported Medium: LAN, Wi-Fi, USB. Download Spacedesk (free) 2. Splashtop Wired XDisplay. Splashtop Wired XDisplay, as the name suggests, will require you to have a USB handy. Unlike Spacedesk, WiredXDisplay allows you to connect your phone only via USB. In order to connect a DVI-D monitor to the DisplayPort port on USB-C Dock, an active DisplayPort to DVI-D adapter or cable is required. A regular passive DisplayPort to DVI cable will not work. For example, the LG 27MP38VQ monitor has both VGA and DVI-D inputs. You can connect it to the USB-C Dock via a DisplayPort to VGA cable, or an active .

can you connect a monitor via usb c